Rolled-paper Picture Frame

Rolled-paper Picture Frame
Messiness: Medium
Age Range: 9y - 16y
Estimated Time:

Activity Designer

Ryan Pilat
30 Projects



For Father’s Day this year, my boys wanted to make a project together that their Dad could take to work. This DIY picture frame project met both of those needs. As you are crafting away, you will all have a lot of quality time together because this photo frame takes some time. But, the end result is worth it. The boys enjoyed ripping lots of pages out of magazine and then cutting them all into strips. And by the end of our 80(!) rolled papers, they had mastered the rolling paper craft. They can’t wait to show their Dad their DIY picture frame, complete with his favorite colors and photo of them.

What You'll Need

  • photo (or art for the picture frame)

How We Did It

Rolled-paper Picture Frame
Gather the materials to make your DIY picture frame.
Rolled-paper Picture Frame

Cut strips of paper that are as wide as your frame. The frame that we are going to make for Father’s Day had an edge that was about 2 1/4 inches wide. Make sure you measure your frame and cut your strips to match it.


You are going to need a bunch of these strips. We needed about 80 to make sure our whole frame was covered. This was a group project, which made this go by much faster and makes the next steps go by faster, too.
Rolled-paper Picture Frame

Take a skewer and roll your paper around it until you end up with a little roll of paper. You’ll want to have the color you want showing at the end to be face down while you are rolling. This makes sure it shows up in your finished frame.


When you get to the end of the strip, add a little glue to the end of the paper and wrap it the rest of the way around. This will hold the paper in place. You can use hot glue for this stage too, but we found it easier to work with the glue stick. Plus, it’s easier to get onto the paper and isn’t super messy if it gets on your fingers. If you do get any on your fingers, just wash it off and keep rolling.


Once the paper is secure, pull the roll off of the skewer. If the ends of the roll aren’t even, just pinch both ends of the roll to even them out.
Rolled-paper Picture Frame
Keep rolling (and rolling) paper until you have enough to cover your frame. This step takes a while, but it makes for a great group activity. I spent this time chatting with my boys and figuring out what else we could do for Father’s Day.
Rolled-paper Picture Frame

Plan out your frame design by placing the rolled papers along the top. Don’t glue them down yet!


You can use this step to make sure you have enough paper rolled and that you know how they all will fit on. If you have a bunch of different colors, you can see if you want to group them together or create a pattern. Everything is moveable at this point, so explore your options. We ended up grouping them together by color and then alternated the direction of the rolls.


We didn’t have enough strips of paper the first time we planned our design, so we had to make a few more so that we could cover the whole frame. Luckily, we had that process down, so it was quick work.
Rolled-paper Picture Frame
It’s time to attach all those rolled papers onto your frame. Add small strips of hot glue and start sticking on all the pieces of paper.
Rolled-paper Picture Frame

Once your frame is covered with rolled paper, you can add in your photo or a piece of artwork. My boys aren’t always super cooperative when it comes to photos, but we found one that we all liked and printed it out to put in the DIY picture frame for their Dad.


This will be a great Father’s Day gift that their Dad can put on his desk at work. You can also personalize this project for any holiday or birthday by using festive paper or someone’s favorite newspaper.

Comments

0 comments No comments yet, be the first to write one!
add an image
0%
add an image
0%